ContinuousOutputModel (Apache Commons Math 3.6.1 API)

java.lang.Object
- org.apache.commons.math3.ode.ContinuousOutputModel

All Implemented Interfaces:

Serializable, StepHandler
```
public class ContinuousOutputModel
extends Object
implements StepHandler, Serializable
```
This class stores all information provided by an ODE integrator during the integration process and build a continuous model of the solution from this.
This class act as a step handler from the integrator point of view. It is called iteratively during the integration process and stores a copy of all steps information in a sorted collection for later use. Once the integration process is over, the user can use the setInterpolatedTime and getInterpolatedState to retrieve this information at any time. It is important to wait for the integration to be over before attempting to call setInterpolatedTime because some internal variables are set only once the last step has been handled.

This is useful for example if the main loop of the user application should remain independent from the integration process or if one needs to mimic the behaviour of an analytical model despite a numerical model is used (i.e. one needs the ability to get the model value at any time or to navigate through the data).

If problem modeling is done with several separate integration phases for contiguous intervals, the same ContinuousOutputModel can be used as step handler for all integration phases as long as they are performed in order and in the same direction. As an example, one can extrapolate the trajectory of a satellite with one model (i.e. one set of differential equations) up to the beginning of a maneuver, use another more complex model including thrusters modeling and accurate attitude control during the maneuver, and revert to the first model after the end of the maneuver. If the same continuous output model handles the steps of all integration phases, the user do not need to bother when the maneuver begins or ends, he has all the data available in a transparent manner.

An important feature of this class is that it implements the Serializable interface. This means that the result of an integration can be serialized and reused later (if stored into a persistent medium like a filesystem or a database) or elsewhere (if sent to another application). Only the result of the integration is stored, there is no reference to the integrated problem by itself.

One should be aware that the amount of data stored in a ContinuousOutputModel instance can be important if the state vector is large, if the integration interval is long or if the steps are small (which can result from small tolerance settings in adaptive step size integrators).

Since:

1.2

See Also:
StepHandler, StepInterpolator, Serialized Form

Constructor Summary

Constructors
Constructor and Description

ContinuousOutputModel()
Simple constructor.

Constructors
Constructor and Description
`ContinuousOutputModel()` Simple constructor.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`append(ContinuousOutputModel model)` Append another model at the end of the instance.
`double`	`getFinalTime()` Get the final integration time.
`double`	`getInitialTime()` Get the initial integration time.
`double[]`	`getInterpolatedDerivatives()` Get the derivatives of the state vector of the interpolated point.
`double[]`	`getInterpolatedSecondaryDerivatives(int secondaryStateIndex)` Get the interpolated secondary derivatives corresponding to the secondary equations.
`double[]`	`getInterpolatedSecondaryState(int secondaryStateIndex)` Get the interpolated secondary state corresponding to the secondary equations.
`double[]`	`getInterpolatedState()` Get the state vector of the interpolated point.
`double`	`getInterpolatedTime()` Get the time of the interpolated point.
`void`	`handleStep(StepInterpolator interpolator, boolean isLast)` Handle the last accepted step.
`void`	`init(double t0, double[] y0, double t)` Initialize step handler at the start of an ODE integration.
`void`	`setInterpolatedTime(double time)` Set the time of the interpolated point.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - ContinuousOutputModel
```
public ContinuousOutputModel()
```
    Simple constructor. Build an empty continuous output model.
- Method Detail
  - append
```
public void append(ContinuousOutputModel model)
            throws MathIllegalArgumentException,
                   MaxCountExceededException
```
    Append another model at the end of the instance.
    
    Parameters:
    model - model to add at the end of the instance
    
    Throws:
    
    MathIllegalArgumentException - if the model to append is not compatible with the instance (dimension of the state vector, propagation direction, hole between the dates)
    
    MaxCountExceededException - if the number of functions evaluations is exceeded during step finalization
  - init
```
public void init(double t0,
        double[] y0,
        double t)
```
    Initialize step handler at the start of an ODE integration.
    This method is called once at the start of the integration. It may be used by the step handler to initialize some internal data if needed.
    
    Specified by:
    
    init in interface StepHandler
    
    Parameters:
    t0 - start value of the independent time variable
    y0 - array containing the start value of the state vector
    t - target time for the integration
  - handleStep
```
public void handleStep(StepInterpolator interpolator,
              boolean isLast)
                throws MaxCountExceededException
```
    Handle the last accepted step. A copy of the information provided by the last step is stored in the instance for later use.
    
    Specified by:
    
    handleStep in interface StepHandler
    
    Parameters:
    interpolator - interpolator for the last accepted step.
    isLast - true if the step is the last one
    
    Throws:
    
    MaxCountExceededException - if the number of functions evaluations is exceeded during step finalization
  - getInitialTime
```
public double getInitialTime()
```
    Get the initial integration time.
    
    Returns:
    initial integration time
  - getFinalTime
```
public double getFinalTime()
```
    Get the final integration time.
    
    Returns:
    final integration time
  - getInterpolatedTime
```
public double getInterpolatedTime()
```
    Get the time of the interpolated point. If setInterpolatedTime(double) has not been called, it returns the final integration time.
    
    Returns:
    interpolation point time
  - setInterpolatedTime
```
public void setInterpolatedTime(double time)
```
    Set the time of the interpolated point.
    This method should not be called before the integration is over because some internal variables are set only once the last step has been handled.
    
    Setting the time outside of the integration interval is now allowed, but should be used with care since the accuracy of the interpolator will probably be very poor far from this interval. This allowance has been added to simplify implementation of search algorithms near the interval endpoints.
    
    Note that each time this method is called, the internal arrays returned in getInterpolatedState(), getInterpolatedDerivatives() and getInterpolatedSecondaryState(int) will be overwritten. So if their content must be preserved across several calls, user must copy them.
    
    Parameters:
    time - time of the interpolated point
    See Also:
    getInterpolatedState(), getInterpolatedDerivatives(), getInterpolatedSecondaryState(int)
  - getInterpolatedState
```
public double[] getInterpolatedState()
                              throws MaxCountExceededException
```
    Get the state vector of the interpolated point.
    The returned vector is a reference to a reused array, so it should not be modified and it should be copied if it needs to be preserved across several calls to the associated setInterpolatedTime(double) method.
    
    Returns:
    state vector at time getInterpolatedTime()
    
    Throws:
    
    MaxCountExceededException - if the number of functions evaluations is exceeded
    See Also:
    setInterpolatedTime(double), getInterpolatedDerivatives(), getInterpolatedSecondaryState(int), getInterpolatedSecondaryDerivatives(int)
  - getInterpolatedDerivatives
```
public double[] getInterpolatedDerivatives()
                                    throws MaxCountExceededException
```
    Get the derivatives of the state vector of the interpolated point.
    The returned vector is a reference to a reused array, so it should not be modified and it should be copied if it needs to be preserved across several calls to the associated setInterpolatedTime(double) method.
    
    Returns:
    derivatives of the state vector at time getInterpolatedTime()
    
    Throws:
    
    MaxCountExceededException - if the number of functions evaluations is exceeded
    Since:
    
    3.4
    
    See Also:
    setInterpolatedTime(double), getInterpolatedState(), getInterpolatedSecondaryState(int), getInterpolatedSecondaryDerivatives(int)
  - getInterpolatedSecondaryState
```
public double[] getInterpolatedSecondaryState(int secondaryStateIndex)
                                       throws MaxCountExceededException
```
    Get the interpolated secondary state corresponding to the secondary equations.
    The returned vector is a reference to a reused array, so it should not be modified and it should be copied if it needs to be preserved across several calls to the associated setInterpolatedTime(double) method.
    
    Parameters:
    secondaryStateIndex - index of the secondary set, as returned by ExpandableStatefulODE.addSecondaryEquations(SecondaryEquations)
    
    Returns:
    interpolated secondary state at the current interpolation date
    
    Throws:
    
    MaxCountExceededException - if the number of functions evaluations is exceeded
    Since:
    
    3.2
    
    See Also:
    setInterpolatedTime(double), getInterpolatedState(), getInterpolatedDerivatives(), getInterpolatedSecondaryDerivatives(int)
  - getInterpolatedSecondaryDerivatives
```
public double[] getInterpolatedSecondaryDerivatives(int secondaryStateIndex)
                                             throws MaxCountExceededException
```
    Get the interpolated secondary derivatives corresponding to the secondary equations.
    The returned vector is a reference to a reused array, so it should not be modified and it should be copied if it needs to be preserved across several calls to the associated setInterpolatedTime(double) method.
    
    Parameters:
    secondaryStateIndex - index of the secondary set, as returned by ExpandableStatefulODE.addSecondaryEquations(SecondaryEquations)
    
    Returns:
    interpolated secondary derivatives at the current interpolation date
    
    Throws:
    
    MaxCountExceededException - if the number of functions evaluations is exceeded
    Since:
    
    3.4
    
    See Also:
    setInterpolatedTime(double), getInterpolatedState(), getInterpolatedDerivatives(), getInterpolatedSecondaryState(int)

Class ContinuousOutputModel

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

ContinuousOutputModel

Method Detail

append

init

handleStep

getInitialTime

getFinalTime

getInterpolatedTime

setInterpolatedTime

getInterpolatedState

getInterpolatedDerivatives

getInterpolatedSecondaryState

getInterpolatedSecondaryDerivatives