Module java.base
Package java.util.concurrent

Interface BlockingQueue<E>

  • Type Parameters:
    E - the type of elements held in this queue
    All Superinterfaces:
    Collection<E>, Iterable<E>, Queue<E>
    All Known Subinterfaces:
    BlockingDeque<E>, TransferQueue<E>
    All Known Implementing Classes:
    ArrayBlockingQueue, DelayQueue, LinkedBlockingDeque, LinkedBlockingQueue, LinkedTransferQueue, PriorityBlockingQueue, SynchronousQueue
    public interface BlockingQueue<E>
extends Queue<E>
    A Queue that additionally supports operations that wait for the queue to become non-empty when retrieving an element, and wait for space to become available in the queue when storing an element.

    BlockingQueue methods come in four forms, with different ways of handling operations that cannot be satisfied immediately, but may be satisfied at some point in the future: one throws an exception, the second returns a special value (either null or false, depending on the operation), the third blocks the current thread indefinitely until the operation can succeed, and the fourth blocks for only a given maximum time limit before giving up. These methods are summarized in the following table:

    Summary of BlockingQueue methods
    Throws exception Special value Blocks Times out
    Insert add(e) offer(e) put(e) offer(e, time, unit)
    Remove remove() poll() take() poll(time, unit)
    Examine element() peek() not applicable not applicable

    A BlockingQueue does not accept null elements. Implementations throw NullPointerException on attempts to add, put or offer a null. A null is used as a sentinel value to indicate failure of poll operations.

    A BlockingQueue may be capacity bounded. At any given time it may have a remainingCapacity beyond which no additional elements can be put without blocking. A BlockingQueue without any intrinsic capacity constraints always reports a remaining capacity of Integer.MAX_VALUE.

    BlockingQueue implementations are designed to be used primarily for producer-consumer queues, but additionally support the Collection interface. So, for example, it is possible to remove an arbitrary element from a queue using remove(x). However, such operations are in general not performed very efficiently, and are intended for only occasional use, such as when a queued message is cancelled.

    BlockingQueue implementations are thread-safe. All queuing methods achieve their effects atomically using internal locks or other forms of concurrency control. However, the bulk Collection operations addAll, containsAll, retainAll and removeAll are not necessarily performed atomically unless specified otherwise in an implementation. So it is possible, for example, for addAll(c) to fail (throwing an exception) after adding only some of the elements in c.

    A BlockingQueue does not intrinsically support any kind of "close" or "shutdown" operation to indicate that no more items will be added. The needs and usage of such features tend to be implementation-dependent. For example, a common tactic is for producers to insert special end-of-stream or poison objects, that are interpreted accordingly when taken by consumers.

    Usage example, based on a typical producer-consumer scenario. Note that a BlockingQueue can safely be used with multiple producers and multiple consumers. 

     
 class Producer implements Runnable {
   private final BlockingQueue queue;
   Producer(BlockingQueue q) { queue = q; }
   public void run() {
     try {
       while (true) { queue.put(produce()); }
     } catch (InterruptedException ex) { ... handle ...}
   }
   Object produce() { ... }
 }

 class Consumer implements Runnable {
   private final BlockingQueue queue;
   Consumer(BlockingQueue q) { queue = q; }
   public void run() {
     try {
       while (true) { consume(queue.take()); }
     } catch (InterruptedException ex) { ... handle ...}
   }
   void consume(Object x) { ... }
 }

 class Setup {
   void main() {
     BlockingQueue q = new SomeQueueImplementation();
     Producer p = new Producer(q);
     Consumer c1 = new Consumer(q);
     Consumer c2 = new Consumer(q);
     new Thread(p).start();
     new Thread(c1).start();
     new Thread(c2).start();
   }
 }

    Memory consistency effects: As with other concurrent collections, actions in a thread prior to placing an object into a BlockingQueue happen-before actions subsequent to the access or removal of that element from the BlockingQueue in another thread.

    This interface is a member of the Java Collections Framework.

    Since:
    1.5

    • Method Summary

      All Methods Instance Methods Abstract Methods 
      Modifier and Type Method Description
      boolean add​(E e)
      Inserts the specified element into this queue if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available.
      boolean contains​(Object o)
      Returns true if this queue contains the specified element.
      int drainTo​(Collection<? super E> c)
      Removes all available elements from this queue and adds them to the given collection.
      int drainTo​(Collection<? super E> c, int maxElements)
      Removes at most the given number of available elements from this queue and adds them to the given collection.
      boolean offer​(E e)
      Inserts the specified element into this queue if it is possible to do so immediately without violating capacity restrictions, returning true upon success and false if no space is currently available.
      boolean offer​(E e, long timeout, TimeUnit unit)
      Inserts the specified element into this queue, waiting up to the specified wait time if necessary for space to become available.
      E poll​(long timeout, TimeUnit unit)
      Retrieves and removes the head of this queue, waiting up to the specified wait time if necessary for an element to become available.
      void put​(E e)
      Inserts the specified element into this queue, waiting if necessary for space to become available.
      int remainingCapacity()
      Returns the number of additional elements that this queue can ideally (in the absence of memory or resource constraints) accept without blocking, or Integer.MAX_VALUE if there is no intrinsic limit.
      boolean remove​(Object o)
      Removes a single instance of the specified element from this queue, if it is present.
      E take()
      Retrieves and removes the head of this queue, waiting if necessary until an element becomes available.

    • Method Detail

      • add

        boolean add​(E e)
        Inserts the specified element into this queue if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available. When using a capacity-restricted queue, it is generally preferable to use offer.
        Specified by:
        add in interface Collection<E>
        Specified by:
        add in interface Queue<E>
        Parameters:
        e - the element to add
        Returns:
        true (as specified by Collection.add(E))
        Throws:
        IllegalStateException - if the element cannot be added at this time due to capacity restrictions
        ClassCastException - if the class of the specified element prevents it from being added to this queue
        NullPointerException - if the specified element is null
        IllegalArgumentException - if some property of the specified element prevents it from being added to this queue

      • offer

        boolean offer​(E e)
        Inserts the specified element into this queue if it is possible to do so immediately without violating capacity restrictions, returning true upon success and false if no space is currently available. When using a capacity-restricted queue, this method is generally preferable to add(E), which can fail to insert an element only by throwing an exception.
        Specified by:
        offer in interface Queue<E>
        Parameters:
        e - the element to add
        Returns:
        true if the element was added to this queue, else false
        Throws:
        ClassCastException - if the class of the specified element prevents it from being added to this queue
        NullPointerException - if the specified element is null
        IllegalArgumentException - if some property of the specified element prevents it from being added to this queue

      • put

        void put​(E e)
  throws InterruptedException
        Inserts the specified element into this queue, waiting if necessary for space to become available.
        Parameters:
        e - the element to add
        Throws:
        InterruptedException - if interrupted while waiting
        ClassCastException - if the class of the specified element prevents it from being added to this queue
        NullPointerException - if the specified element is null
        IllegalArgumentException - if some property of the specified element prevents it from being added to this queue

      • offer

        boolean offer​(E e,
              long timeout,
              TimeUnit unit)
       throws InterruptedException
        Inserts the specified element into this queue, waiting up to the specified wait time if necessary for space to become available.
        Parameters:
        e - the element to add
        timeout - how long to wait before giving up, in units of unit
        unit - a TimeUnit determining how to interpret the timeout parameter
        Returns:
        true if successful, or false if the specified waiting time elapses before space is available
        Throws:
        InterruptedException - if interrupted while waiting
        ClassCastException - if the class of the specified element prevents it from being added to this queue
        NullPointerException - if the specified element is null
        IllegalArgumentException - if some property of the specified element prevents it from being added to this queue

      • take

        E take()
throws InterruptedException
        Retrieves and removes the head of this queue, waiting if necessary until an element becomes available.
        Returns:
        the head of this queue
        Throws:
        InterruptedException - if interrupted while waiting

      • poll

        E poll​(long timeout,
       TimeUnit unit)
throws InterruptedException
        Retrieves and removes the head of this queue, waiting up to the specified wait time if necessary for an element to become available.
        Parameters:
        timeout - how long to wait before giving up, in units of unit
        unit - a TimeUnit determining how to interpret the timeout parameter
        Returns:
        the head of this queue, or null if the specified waiting time elapses before an element is available
        Throws:
        InterruptedException - if interrupted while waiting

      • remainingCapacity

        int remainingCapacity()
        Returns the number of additional elements that this queue can ideally (in the absence of memory or resource constraints) accept without blocking, or Integer.MAX_VALUE if there is no intrinsic limit.

        Note that you cannot always tell if an attempt to insert an element will succeed by inspecting remainingCapacity because it may be the case that another thread is about to insert or remove an element.

        Returns:
        the remaining capacity

      • remove

        boolean remove​(Object o)
        Removes a single instance of the specified element from this queue, if it is present. More formally, removes an element e such that o.equals(e), if this queue contains one or more such elements. Returns true if this queue contained the specified element (or equivalently, if this queue changed as a result of the call).
        Specified by:
        remove in interface Collection<E>
        Parameters:
        o - element to be removed from this queue, if present
        Returns:
        true if this queue changed as a result of the call
        Throws:
        ClassCastException - if the class of the specified element is incompatible with this queue (optional)
        NullPointerException - if the specified element is null (optional)

      • contains

        boolean contains​(Object o)
        Returns true if this queue contains the specified element. More formally, returns true if and only if this queue contains at least one element e such that o.equals(e).
        Specified by:
        contains in interface Collection<E>
        Parameters:
        o - object to be checked for containment in this queue
        Returns:
        true if this queue contains the specified element
        Throws:
        ClassCastException - if the class of the specified element is incompatible with this queue (optional)
        NullPointerException - if the specified element is null (optional)

      • drainTo

        int drainTo​(Collection<? super E> c)
        Removes all available elements from this queue and adds them to the given collection. This operation may be more efficient than repeatedly polling this queue. A failure encountered while attempting to add elements to collection c may result in elements being in neither, either or both collections when the associated exception is thrown. Attempts to drain a queue to itself result in IllegalArgumentException. Further, the behavior of this operation is undefined if the specified collection is modified while the operation is in progress.
        Parameters:
        c - the collection to transfer elements into
        Returns:
        the number of elements transferred
        Throws:
        UnsupportedOperationException - if addition of elements is not supported by the specified collection
        ClassCastException - if the class of an element of this queue prevents it from being added to the specified collection
        NullPointerException - if the specified collection is null
        IllegalArgumentException - if the specified collection is this queue, or some property of an element of this queue prevents it from being added to the specified collection

      • drainTo

        int drainTo​(Collection<? super E> c,
            int maxElements)
        Removes at most the given number of available elements from this queue and adds them to the given collection. A failure encountered while attempting to add elements to collection c may result in elements being in neither, either or both collections when the associated exception is thrown. Attempts to drain a queue to itself result in IllegalArgumentException. Further, the behavior of this operation is undefined if the specified collection is modified while the operation is in progress.
        Parameters:
        c - the collection to transfer elements into
        maxElements - the maximum number of elements to transfer
        Returns:
        the number of elements transferred
        Throws:
        UnsupportedOperationException - if addition of elements is not supported by the specified collection
        ClassCastException - if the class of an element of this queue prevents it from being added to the specified collection
        NullPointerException - if the specified collection is null
        IllegalArgumentException - if the specified collection is this queue, or some property of an element of this queue prevents it from being added to the specified collection