Uses of Class java.net.SocketException (Java SE 13 & JDK 13 )

Packages that use SocketException
Package	Description
java.net	Provides the classes for implementing networking applications.

Uses of SocketException in java.net

Subclasses of SocketException in java.net
Modifier and Type	Class	Description
`class`	`BindException`	Signals that an error occurred while attempting to bind a socket to a local address and port.
`class`	`ConnectException`	Signals that an error occurred while attempting to connect a socket to a remote address and port.
`class`	`NoRouteToHostException`	Signals that an error occurred while attempting to connect a socket to a remote address and port.
`class`	`PortUnreachableException`	Signals that an ICMP Port Unreachable message has been received on a connected datagram.

Methods in java.net that throw SocketException
Modifier and Type	Method	Description
`void`	DatagramSocket.`bind(SocketAddress addr)`	Binds this DatagramSocket to a specific address and port.
`protected abstract void`	DatagramSocketImpl.`bind(int lport, InetAddress laddr)`	Binds a datagram socket to a local port and address.
`void`	DatagramSocket.`connect(SocketAddress addr)`	Connects this socket to a remote socket address (IP address + port number).
`protected void`	DatagramSocketImpl.`connect(InetAddress address, int port)`	Connects a datagram socket to a remote destination.
`protected abstract void`	DatagramSocketImpl.`create()`	Creates a datagram socket.
`boolean`	DatagramSocket.`getBroadcast()`	Tests if SO_BROADCAST is enabled.
`static NetworkInterface`	NetworkInterface.`getByIndex(int index)`	Get a network interface given its index.
`static NetworkInterface`	NetworkInterface.`getByInetAddress(InetAddress addr)`	Convenience method to search for a network interface that has the specified Internet Protocol (IP) address bound to it.
`static NetworkInterface`	NetworkInterface.`getByName(String name)`	Searches for the network interface with the specified name.
`byte[]`	NetworkInterface.`getHardwareAddress()`	Returns the hardware address (usually MAC) of the interface if it has one and if it can be accessed given the current privileges.
`InetAddress`	MulticastSocket.`getInterface()`	Retrieve the address of the network interface used for multicast packets.
`boolean`	Socket.`getKeepAlive()`	Tests if `SO_KEEPALIVE` is enabled.
`boolean`	MulticastSocket.`getLoopbackMode()`	Get the setting for local loopback of multicast datagrams.
`int`	NetworkInterface.`getMTU()`	Returns the Maximum Transmission Unit (MTU) of this interface.
`NetworkInterface`	MulticastSocket.`getNetworkInterface()`	Get the multicast network interface set.
`static Enumeration<NetworkInterface>`	NetworkInterface.`getNetworkInterfaces()`	Returns an `Enumeration` of all the interfaces on this machine.
`boolean`	Socket.`getOOBInline()`	Tests if `SO_OOBINLINE` is enabled.
`Object`	SocketOptions.`getOption(int optID)`	Fetch the value of an option.
`int`	DatagramSocket.`getReceiveBufferSize()`	Get value of the SO_RCVBUF option for this `DatagramSocket`, that is the buffer size used by the platform for input on this `DatagramSocket`.
`int`	ServerSocket.`getReceiveBufferSize()`	Gets the value of the `SO_RCVBUF` option for this `ServerSocket`, that is the proposed buffer size that will be used for Sockets accepted from this `ServerSocket`.
`int`	Socket.`getReceiveBufferSize()`	Gets the value of the `SO_RCVBUF` option for this `Socket`, that is the buffer size used by the platform for input on this `Socket`.
`boolean`	DatagramSocket.`getReuseAddress()`	Tests if SO_REUSEADDR is enabled.
`boolean`	ServerSocket.`getReuseAddress()`	Tests if `SO_REUSEADDR` is enabled.
`boolean`	Socket.`getReuseAddress()`	Tests if `SO_REUSEADDR` is enabled.
`int`	DatagramSocket.`getSendBufferSize()`	Get value of the SO_SNDBUF option for this `DatagramSocket`, that is the buffer size used by the platform for output on this `DatagramSocket`.
`int`	Socket.`getSendBufferSize()`	Get value of the `SO_SNDBUF` option for this `Socket`, that is the buffer size used by the platform for output on this `Socket`.
`int`	Socket.`getSoLinger()`	Returns setting for `SO_LINGER`.
`int`	DatagramSocket.`getSoTimeout()`	Retrieve setting for SO_TIMEOUT. 0 returns implies that the option is disabled (i.e., timeout of infinity).
`int`	Socket.`getSoTimeout()`	Returns setting for `SO_TIMEOUT`. 0 returns implies that the option is disabled (i.e., timeout of infinity).
`boolean`	Socket.`getTcpNoDelay()`	Tests if `TCP_NODELAY` is enabled.
`int`	DatagramSocket.`getTrafficClass()`	Gets traffic class or type-of-service in the IP datagram header for packets sent from this DatagramSocket.
`int`	Socket.`getTrafficClass()`	Gets traffic class or type-of-service in the IP header for packets sent from this Socket
`boolean`	NetworkInterface.`isLoopback()`	Returns whether a network interface is a loopback interface.
`boolean`	NetworkInterface.`isPointToPoint()`	Returns whether a network interface is a point to point interface.
`boolean`	NetworkInterface.`isUp()`	Returns whether a network interface is up and running.
`static Stream<NetworkInterface>`	NetworkInterface.`networkInterfaces()`	Returns a `Stream` of all the interfaces on this machine.
`void`	DatagramSocket.`setBroadcast(boolean on)`	Enable/disable SO_BROADCAST.
`void`	MulticastSocket.`setInterface(InetAddress inf)`	Set the multicast network interface used by methods whose behavior would be affected by the value of the network interface.
`void`	Socket.`setKeepAlive(boolean on)`	Enable/disable `SO_KEEPALIVE`.
`void`	MulticastSocket.`setLoopbackMode(boolean disable)`	Disable/Enable local loopback of multicast datagrams The option is used by the platform's networking code as a hint for setting whether multicast data will be looped back to the local socket.
`void`	MulticastSocket.`setNetworkInterface(NetworkInterface netIf)`	Specify the network interface for outgoing multicast datagrams sent on this socket.
`void`	Socket.`setOOBInline(boolean on)`	Enable/disable `SO_OOBINLINE` (receipt of TCP urgent data) By default, this option is disabled and TCP urgent data received on a socket is silently discarded.
`void`	SocketOptions.`setOption(int optID, Object value)`	Enable/disable the option specified by optID.
`void`	DatagramSocket.`setReceiveBufferSize(int size)`	Sets the SO_RCVBUF option to the specified value for this `DatagramSocket`.
`void`	ServerSocket.`setReceiveBufferSize(int size)`	Sets a default proposed value for the `SO_RCVBUF` option for sockets accepted from this `ServerSocket`.
`void`	Socket.`setReceiveBufferSize(int size)`	Sets the `SO_RCVBUF` option to the specified value for this `Socket`.
`void`	DatagramSocket.`setReuseAddress(boolean on)`	Enable/disable the SO_REUSEADDR socket option.
`void`	ServerSocket.`setReuseAddress(boolean on)`	Enable/disable the `SO_REUSEADDR` socket option.
`void`	Socket.`setReuseAddress(boolean on)`	Enable/disable the `SO_REUSEADDR` socket option.
`void`	DatagramSocket.`setSendBufferSize(int size)`	Sets the SO_SNDBUF option to the specified value for this `DatagramSocket`.
`void`	Socket.`setSendBufferSize(int size)`	Sets the `SO_SNDBUF` option to the specified value for this `Socket`.
`void`	Socket.`setSoLinger(boolean on, int linger)`	Enable/disable `SO_LINGER` with the specified linger time in seconds.
`void`	DatagramSocket.`setSoTimeout(int timeout)`	Enable/disable SO_TIMEOUT with the specified timeout, in milliseconds.
`void`	ServerSocket.`setSoTimeout(int timeout)`	Enable/disable `SO_TIMEOUT` with the specified timeout, in milliseconds.
`void`	Socket.`setSoTimeout(int timeout)`	Enable/disable `SO_TIMEOUT` with the specified timeout, in milliseconds.
`void`	Socket.`setTcpNoDelay(boolean on)`	Enable/disable `TCP_NODELAY` (disable/enable Nagle's algorithm).
`void`	DatagramSocket.`setTrafficClass(int tc)`	Sets traffic class or type-of-service octet in the IP datagram header for datagrams sent from this DatagramSocket.
`void`	Socket.`setTrafficClass(int tc)`	Sets traffic class or type-of-service octet in the IP header for packets sent from this Socket.
`boolean`	NetworkInterface.`supportsMulticast()`	Returns whether a network interface supports multicasting or not.

Constructors in java.net that throw SocketException
Constructor	Description
`DatagramSocket()`	Constructs a datagram socket and binds it to any available port on the local host machine.
`DatagramSocket(int port)`	Constructs a datagram socket and binds it to the specified port on the local host machine.
`DatagramSocket(int port, InetAddress laddr)`	Creates a datagram socket, bound to the specified local address.
`DatagramSocket(SocketAddress bindaddr)`	Creates a datagram socket, bound to the specified local socket address.
`Socket(SocketImpl impl)`	Creates an unconnected Socket with a user-specified SocketImpl.

Uses of Classjava.net.SocketException

Uses of SocketException in java.net

Uses of Class
java.net.SocketException