java.lang.Object
- com.google.common.base.Ascii

```
@GwtCompatible
public final class Ascii
extends Object
```
Static methods pertaining to ASCII characters (those in the range of values 0x00 through 0x7F), and to strings containing such characters.
ASCII utilities also exist in other classes of this package:
- Charsets.US_ASCII specifies the Charset of ASCII characters.
- CharMatcher.ascii() matches ASCII characters and provides text processing methods which operate only on the ASCII characters of a string.
Since:

7.0

Author:

Catherine Berry, Gregory Kick

Field Summary

Fields
Modifier and Type	Field	Description
`static byte`	`ACK`	Acknowledge: A communication control character transmitted by a receiver as an affirmative response to a sender.
`static byte`	`BEL`	Bell ('\a'): A character for use when there is a need to call for human attention.
`static byte`	`BS`	Backspace ('\b'): A format effector which controls the movement of the printing position one printing space backward on the same printing line.
`static byte`	`CAN`	Cancel: A control character used to indicate that the data with which it is sent is in error or is to be disregarded.
`static byte`	`CR`	Carriage Return ('\r'): A format effector which controls the movement of the printing position to the first printing position on the same printing line.
`static byte`	`DC1`	Device Control 1.
`static byte`	`DC2`	Device Control 2.
`static byte`	`DC3`	Device Control 3.
`static byte`	`DC4`	Device Control 4.
`static byte`	`DEL`	Delete: This character is used primarily to "erase" or "obliterate" erroneous or unwanted characters in perforated tape.
`static byte`	`DLE`	Data Link Escape: A communication control character which will change the meaning of a limited number of contiguously following characters.
`static byte`	`EM`	End of Medium: A control character associated with the sent data which may be used to identify the physical end of the medium, or the end of the used, or wanted, portion of information recorded on a medium.
`static byte`	`ENQ`	Enquiry: A communication control character used in data communication systems as a request for a response from a remote station.
`static byte`	`EOT`	End of Transmission: A communication control character used to indicate the conclusion of a transmission, which may have contained one or more texts and any associated headings.
`static byte`	`ESC`	Escape: A control character intended to provide code extension (supplementary characters) in general information interchange.
`static byte`	`ETB`	End of Transmission Block: A communication control character used to indicate the end of a block of data for communication purposes.
`static byte`	`ETX`	End of Text: A communication control character used to terminate a sequence of characters started with STX and transmitted as an entity.
`static byte`	`FF`	Form Feed ('\f'): A format effector which controls the movement of the printing position to the first pre-determined printing line on the next form or page.
`static byte`	`FS`	File Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive.
`static byte`	`GS`	Group Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive.
`static byte`	`HT`	Horizontal Tabulation ('\t'): A format effector which controls the movement of the printing position to the next in a series of predetermined positions along the printing line.
`static byte`	`LF`	Line Feed ('\n'): A format effector which controls the movement of the printing position to the next printing line.
`static char`	`MAX`	The maximum value of an ASCII character.
`static char`	`MIN`	The minimum value of an ASCII character.
`static byte`	`NAK`	Negative Acknowledge: A communication control character transmitted by a receiver as a negative response to the sender.
`static byte`	`NL`	Alternate name for `LF`.
`static byte`	`NUL`	Null ('\0'): The all-zeros character which may serve to accomplish time fill and media fill.
`static byte`	`RS`	Record Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive.
`static byte`	`SI`	Shift In: A control character indicating that the code combinations which follow shall be interpreted according to the standard code table.
`static byte`	`SO`	Shift Out: A control character indicating that the code combinations which follow shall be interpreted as outside of the character set of the standard code table until a Shift In character is reached.
`static byte`	`SOH`	Start of Heading: A communication control character used at the beginning of a sequence of characters which constitute a machine-sensible address or routing information.
`static byte`	`SP`	Space: A normally non-printing graphic character used to separate words.
`static byte`	`SPACE`	Alternate name for `SP`.
`static byte`	`STX`	Start of Text: A communication control character which precedes a sequence of characters that is to be treated as an entity and entirely transmitted through to the ultimate destination.
`static byte`	`SUB`	Substitute: A character that may be substituted for a character which is determined to be invalid or in error.
`static byte`	`SYN`	Synchronous Idle: A communication control character used by a synchronous transmission system in the absence of any other character to provide a signal from which synchronism may be achieved or retained.
`static byte`	`US`	Unit Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive.
`static byte`	`VT`	Vertical Tabulation ('\v'): A format effector which controls the movement of the printing position to the next in a series of predetermined printing lines.
`static byte`	`XOFF`	Transmission off.
`static byte`	`XON`	Transmission On: Although originally defined as DC1, this ASCII control character is now better known as the XON code used for software flow control in serial communications.

Method Summary

All Methods Static Methods Concrete Methods
Modifier and Type	Method	Description
`static boolean`	`equalsIgnoreCase(CharSequence s1, CharSequence s2)`	Indicates whether the contents of the given character sequences `s1` and `s2` are equal, ignoring the case of any ASCII alphabetic characters between `'a'` and `'z'` or `'A'` and `'Z'` inclusive.
`static boolean`	`isLowerCase(char c)`	Indicates whether `c` is one of the twenty-six lowercase ASCII alphabetic characters between `'a'` and `'z'` inclusive.
`static boolean`	`isUpperCase(char c)`	Indicates whether `c` is one of the twenty-six uppercase ASCII alphabetic characters between `'A'` and `'Z'` inclusive.
`static char`	`toLowerCase(char c)`	If the argument is an uppercase ASCII character, returns the lowercase equivalent.
`static String`	`toLowerCase(CharSequence chars)`	Returns a copy of the input character sequence in which all uppercase ASCII characters have been converted to lowercase.
`static String`	`toLowerCase(String string)`	Returns a copy of the input string in which all uppercase ASCII characters have been converted to lowercase.
`static char`	`toUpperCase(char c)`	If the argument is a lowercase ASCII character, returns the uppercase equivalent.
`static String`	`toUpperCase(CharSequence chars)`	Returns a copy of the input character sequence in which all lowercase ASCII characters have been converted to uppercase.
`static String`	`toUpperCase(String string)`	Returns a copy of the input string in which all lowercase ASCII characters have been converted to uppercase.
`static String`	`truncate(CharSequence seq, int maxLength, String truncationIndicator)`	Truncates the given character sequence to the given maximum length.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - NUL
```
public static final byte NUL
```
    Null ('\0'): The all-zeros character which may serve to accomplish time fill and media fill. Normally used as a C string terminator.
    Although RFC 20 names this as "Null", note that it is distinct from the C/C++ "NULL" pointer.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SOH
```
public static final byte SOH
```
    Start of Heading: A communication control character used at the beginning of a sequence of characters which constitute a machine-sensible address or routing information. Such a sequence is referred to as the "heading." An STX character has the effect of terminating a heading.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - STX
```
public static final byte STX
```
    Start of Text: A communication control character which precedes a sequence of characters that is to be treated as an entity and entirely transmitted through to the ultimate destination. Such a sequence is referred to as "text." STX may be used to terminate a sequence of characters started by SOH.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - ETX
```
public static final byte ETX
```
    End of Text: A communication control character used to terminate a sequence of characters started with STX and transmitted as an entity.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - EOT
```
public static final byte EOT
```
    End of Transmission: A communication control character used to indicate the conclusion of a transmission, which may have contained one or more texts and any associated headings.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - ENQ
```
public static final byte ENQ
```
    Enquiry: A communication control character used in data communication systems as a request for a response from a remote station. It may be used as a "Who Are You" (WRU) to obtain identification, or may be used to obtain station status, or both.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - ACK
```
public static final byte ACK
```
    Acknowledge: A communication control character transmitted by a receiver as an affirmative response to a sender.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - BEL
```
public static final byte BEL
```
    Bell ('\a'): A character for use when there is a need to call for human attention. It may control alarm or attention devices.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - BS
```
public static final byte BS
```
    Backspace ('\b'): A format effector which controls the movement of the printing position one printing space backward on the same printing line. (Applicable also to display devices.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - HT
```
public static final byte HT
```
    Horizontal Tabulation ('\t'): A format effector which controls the movement of the printing position to the next in a series of predetermined positions along the printing line. (Applicable also to display devices and the skip function on punched cards.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - LF
```
public static final byte LF
```
    Line Feed ('\n'): A format effector which controls the movement of the printing position to the next printing line. (Applicable also to display devices.) Where appropriate, this character may have the meaning "New Line" (NL), a format effector which controls the movement of the printing point to the first printing position on the next printing line. Use of this convention requires agreement between sender and recipient of data.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - NL
```
public static final byte NL
```
    Alternate name for LF. (LF is preferred.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - VT
```
public static final byte VT
```
    Vertical Tabulation ('\v'): A format effector which controls the movement of the printing position to the next in a series of predetermined printing lines. (Applicable also to display devices.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - FF
```
public static final byte FF
```
    Form Feed ('\f'): A format effector which controls the movement of the printing position to the first pre-determined printing line on the next form or page. (Applicable also to display devices.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - CR
```
public static final byte CR
```
    Carriage Return ('\r'): A format effector which controls the movement of the printing position to the first printing position on the same printing line. (Applicable also to display devices.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SO
```
public static final byte SO
```
    Shift Out: A control character indicating that the code combinations which follow shall be interpreted as outside of the character set of the standard code table until a Shift In character is reached.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SI
```
public static final byte SI
```
    Shift In: A control character indicating that the code combinations which follow shall be interpreted according to the standard code table.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DLE
```
public static final byte DLE
```
    Data Link Escape: A communication control character which will change the meaning of a limited number of contiguously following characters. It is used exclusively to provide supplementary controls in data communication networks.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DC1
```
public static final byte DC1
```
    Device Control 1. Characters for the control of ancillary devices associated with data processing or telecommunication systems, more especially switching devices "on" or "off." (If a single "stop" control is required to interrupt or turn off ancillary devices, DC4 is the preferred assignment.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - XON
```
public static final byte XON
```
    Transmission On: Although originally defined as DC1, this ASCII control character is now better known as the XON code used for software flow control in serial communications. The main use is restarting the transmission after the communication has been stopped by the XOFF control code.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DC2
```
public static final byte DC2
```
    Device Control 2. Characters for the control of ancillary devices associated with data processing or telecommunication systems, more especially switching devices "on" or "off." (If a single "stop" control is required to interrupt or turn off ancillary devices, DC4 is the preferred assignment.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DC3
```
public static final byte DC3
```
    Device Control 3. Characters for the control of ancillary devices associated with data processing or telecommunication systems, more especially switching devices "on" or "off." (If a single "stop" control is required to interrupt or turn off ancillary devices, DC4 is the preferred assignment.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - XOFF
```
public static final byte XOFF
```
    Transmission off. See XON for explanation.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DC4
```
public static final byte DC4
```
    Device Control 4. Characters for the control of ancillary devices associated with data processing or telecommunication systems, more especially switching devices "on" or "off." (If a single "stop" control is required to interrupt or turn off ancillary devices, DC4 is the preferred assignment.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - NAK
```
public static final byte NAK
```
    Negative Acknowledge: A communication control character transmitted by a receiver as a negative response to the sender.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SYN
```
public static final byte SYN
```
    Synchronous Idle: A communication control character used by a synchronous transmission system in the absence of any other character to provide a signal from which synchronism may be achieved or retained.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - ETB
```
public static final byte ETB
```
    End of Transmission Block: A communication control character used to indicate the end of a block of data for communication purposes. ETB is used for blocking data where the block structure is not necessarily related to the processing format.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - CAN
```
public static final byte CAN
```
    Cancel: A control character used to indicate that the data with which it is sent is in error or is to be disregarded.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - EM
```
public static final byte EM
```
    End of Medium: A control character associated with the sent data which may be used to identify the physical end of the medium, or the end of the used, or wanted, portion of information recorded on a medium. (The position of this character does not necessarily correspond to the physical end of the medium.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SUB
```
public static final byte SUB
```
    Substitute: A character that may be substituted for a character which is determined to be invalid or in error.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - ESC
```
public static final byte ESC
```
    Escape: A control character intended to provide code extension (supplementary characters) in general information interchange. The Escape character itself is a prefix affecting the interpretation of a limited number of contiguously following characters.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - FS
```
public static final byte FS
```
    File Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive. (The content and length of a File, Group, Record, or Unit are not specified.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - GS
```
public static final byte GS
```
    Group Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive. (The content and length of a File, Group, Record, or Unit are not specified.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - RS
```
public static final byte RS
```
    Record Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive. (The content and length of a File, Group, Record, or Unit are not specified.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - US
```
public static final byte US
```
    Unit Separator: These four information separators may be used within data in optional fashion, except that their hierarchical relationship shall be: FS is the most inclusive, then GS, then RS, and US is least inclusive. (The content and length of a File, Group, Record, or Unit are not specified.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SP
```
public static final byte SP
```
    Space: A normally non-printing graphic character used to separate words. It is also a format effector which controls the movement of the printing position, one printing position forward. (Applicable also to display devices.)
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - SPACE
```
public static final byte SPACE
```
    Alternate name for SP.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - DEL
```
public static final byte DEL
```
    Delete: This character is used primarily to "erase" or "obliterate" erroneous or unwanted characters in perforated tape.
    
    Since:
    
    8.0
    
    See Also:
    
    Constant Field Values
  - MIN
```
public static final char MIN
```
    The minimum value of an ASCII character.
    
    Since:
    
    9.0 (was type int before 12.0)
    
    See Also:
    
    Constant Field Values
  - MAX
```
public static final char MAX
```
    The maximum value of an ASCII character.
    
    Since:
    
    9.0 (was type int before 12.0)
    
    See Also:
    
    Constant Field Values
- Method Detail
  - toLowerCase
```
public static String toLowerCase(String string)
```
    Returns a copy of the input string in which all uppercase ASCII characters have been converted to lowercase. All other characters are copied without modification.
  - toLowerCase
```
public static String toLowerCase(CharSequence chars)
```
    Returns a copy of the input character sequence in which all uppercase ASCII characters have been converted to lowercase. All other characters are copied without modification.
    
    Since:
    
    14.0
  - toLowerCase
```
public static char toLowerCase(char c)
```
    If the argument is an uppercase ASCII character, returns the lowercase equivalent. Otherwise returns the argument.
  - toUpperCase
```
public static String toUpperCase(String string)
```
    Returns a copy of the input string in which all lowercase ASCII characters have been converted to uppercase. All other characters are copied without modification.
  - toUpperCase
```
public static String toUpperCase(CharSequence chars)
```
    Returns a copy of the input character sequence in which all lowercase ASCII characters have been converted to uppercase. All other characters are copied without modification.
    
    Since:
    
    14.0
  - toUpperCase
```
public static char toUpperCase(char c)
```
    If the argument is a lowercase ASCII character, returns the uppercase equivalent. Otherwise returns the argument.
  - isLowerCase
```
public static boolean isLowerCase(char c)
```
    Indicates whether c is one of the twenty-six lowercase ASCII alphabetic characters between 'a' and 'z' inclusive. All others (including non-ASCII characters) return false.
  - isUpperCase
```
public static boolean isUpperCase(char c)
```
    Indicates whether c is one of the twenty-six uppercase ASCII alphabetic characters between 'A' and 'Z' inclusive. All others (including non-ASCII characters) return false.
  - truncate
```
public static String truncate(CharSequence seq,
                              int maxLength,
                              String truncationIndicator)
```
    Truncates the given character sequence to the given maximum length. If the length of the sequence is greater than maxLength, the returned string will be exactly maxLength chars in length and will end with the given truncationIndicator. Otherwise, the sequence will be returned as a string with no changes to the content.
    Examples:
    Ascii.truncate("foobar", 7, "..."); // returns "foobar" Ascii.truncate("foobar", 5, "..."); // returns "fo..."
    
    Note: This method may work with certain non-ASCII text but is not safe for use with arbitrary Unicode text. It is mostly intended for use with text that is known to be safe for use with it (such as all-ASCII text) and for simple debugging text. When using this method, consider the following:
    
    it may split surrogate pairs
    it may split characters and combining characters
    it does not consider word boundaries
    if truncating for display to users, there are other considerations that must be taken into account
    the appropriate truncation indicator may be locale-dependent
    it is safe to use non-ASCII characters in the truncation indicator
    Throws:
    
    IllegalArgumentException - if maxLength is less than the length of truncationIndicator
    
    Since:
    
    16.0
  - equalsIgnoreCase
```
public static boolean equalsIgnoreCase(CharSequence s1,
                                       CharSequence s2)
```
    Indicates whether the contents of the given character sequences s1 and s2 are equal, ignoring the case of any ASCII alphabetic characters between 'a' and 'z' or 'A' and 'Z' inclusive.
    This method is significantly faster than String.equalsIgnoreCase(java.lang.String) and should be used in preference if at least one of the parameters is known to contain only ASCII characters.
    Note however that this method does not always behave identically to expressions such as:
    
    string.toUpperCase().equals("UPPER CASE ASCII")
    string.toLowerCase().equals("lower case ascii")
    
    due to case-folding of some non-ASCII characters (which does not occur in String.equalsIgnoreCase(java.lang.String)). However in almost all cases that ASCII strings are used, the author probably wanted the behavior provided by this method rather than the subtle and sometimes surprising behavior of toUpperCase() and toLowerCase().
    Since:
    
    16.0

Class Ascii

Field Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

NUL

SOH

STX

ETX

EOT

ENQ

ACK

BEL

BS

HT

LF

NL

VT

FF

CR

SO

SI

DLE

DC1

XON

DC2

DC3

XOFF

DC4

NAK

SYN

ETB

CAN

EM

SUB

ESC

FS

GS

RS

US

SP

SPACE

DEL

MIN

MAX

Method Detail

toLowerCase

toLowerCase

toLowerCase

toUpperCase

toUpperCase

toUpperCase

isLowerCase

isUpperCase

truncate

equalsIgnoreCase