Interface IWorkbenchPage

All Superinterfaces:
IPartService, ISelectionService
All Known Implementing Classes:
WorkbenchPage

public interface IWorkbenchPage extends IPartService, ISelectionService
A workbench page consists of an arrangement of views and editors intended to be presented together to the user in a single workbench window.

A page can contain 0 or more views and 0 or more editors. These views and editors are contained wholly within the page and are not shared with other pages. The layout and visible action set for the page is defined by a perspective.

The number of views and editors within a page is restricted to simplify part management for the user. In particular:

  • Unless a view explicitly allows for multiple instances in its plug-in declaration there will be only one instance in a given workbench page.
  • Only one editor can exist for each editor input within a page.

This interface is not intended to be implemented by clients.

See Also:
Restriction:
This interface is not intended to be implemented by clients.
  • Field Details

    • EDITOR_ID_ATTR

      @Deprecated static final String EDITOR_ID_ATTR
      Deprecated.
      in 3.0 since the notion of markers this is not generally applicable. Use the IDE-specific constant IDE.EDITOR_ID_ATTR.
      An optional attribute within a workspace marker (IMarker) which identifies the preferred editor type to be opened when openEditor is called.
      See Also:
    • CHANGE_RESET

      static final String CHANGE_RESET
      Change event id when the perspective is reset to its original state.
      See Also:
    • CHANGE_RESET_COMPLETE

      static final String CHANGE_RESET_COMPLETE
      Change event id when the perspective has completed a reset to its original state.
      Since:
      3.0
      See Also:
    • CHANGE_VIEW_SHOW

      static final String CHANGE_VIEW_SHOW
      Change event id when one or more views are shown in a perspective.
      See Also:
    • CHANGE_VIEW_HIDE

      static final String CHANGE_VIEW_HIDE
      Change event id when one or more views are hidden in a perspective.
      See Also:
    • CHANGE_EDITOR_OPEN

      static final String CHANGE_EDITOR_OPEN
      Change event id when one or more editors are opened in a perspective.
      See Also:
    • CHANGE_EDITOR_CLOSE

      static final String CHANGE_EDITOR_CLOSE
      Change event id when one or more editors are closed in a perspective.
      See Also:
    • CHANGE_EDITOR_AREA_SHOW

      static final String CHANGE_EDITOR_AREA_SHOW
      Change event id when the editor area is shown in a perspective.
      See Also:
    • CHANGE_EDITOR_AREA_HIDE

      static final String CHANGE_EDITOR_AREA_HIDE
      Change event id when the editor area is hidden in a perspective.
      See Also:
    • CHANGE_ACTION_SET_SHOW

      static final String CHANGE_ACTION_SET_SHOW
      Change event id when an action set is shown in a perspective.
      See Also:
    • CHANGE_ACTION_SET_HIDE

      static final String CHANGE_ACTION_SET_HIDE
      Change event id when an action set is hidden in a perspective.
      See Also:
    • CHANGE_FAST_VIEW_ADD

      static final String CHANGE_FAST_VIEW_ADD
      Change event id when a fast view is added in a perspective.
      See Also:
    • CHANGE_FAST_VIEW_REMOVE

      static final String CHANGE_FAST_VIEW_REMOVE
      Change event id when a fast view is removed in a perspective.
      See Also:
    • CHANGE_WORKING_SET_REPLACE

      static final String CHANGE_WORKING_SET_REPLACE
      Change event id when the page working set was replaced
      See Also:
    • CHANGE_WORKING_SETS_REPLACE

      static final String CHANGE_WORKING_SETS_REPLACE
      Change event id when the page working set list was replaced
      Since:
      3.2
      See Also:
    • VIEW_ACTIVATE

      static final int VIEW_ACTIVATE
      Show view mode that indicates the view should be made visible and activated. Use of this mode has the same effect as calling showView(String).
      Since:
      3.0
      See Also:
    • VIEW_VISIBLE

      static final int VIEW_VISIBLE
      Show view mode that indicates the view should be made visible. If the view is opened in the container that contains the active view then this has the same effect as VIEW_CREATE.
      Since:
      3.0
      See Also:
    • VIEW_CREATE

      static final int VIEW_CREATE
      Show view mode that indicates the view should be made created but not necessarily be made visible. It will only be made visible in the event that it is opened in its own container. In other words, only if it is not stacked with another view.
      Since:
      3.0
      See Also:
    • MATCH_NONE

      static final int MATCH_NONE
      Editor opening match mode specifying that no matching against existing editors should be done.
      Since:
      3.2
      See Also:
    • MATCH_INPUT

      static final int MATCH_INPUT
      Editor opening match mode specifying that the editor input should be considered when matching against existing editors.
      Since:
      3.2
      See Also:
    • MATCH_ID

      static final int MATCH_ID
      Editor opening match mode specifying that the editor id should be considered when matching against existing editors.
      Since:
      3.2
      See Also:
    • MATCH_IGNORE_SIZE

      static final int MATCH_IGNORE_SIZE
      Editor opening match mode specifying that the editor selection strategy should ignore file size
      Since:
      3.125
      See Also:
    • STATE_MINIMIZED

      static final int STATE_MINIMIZED
      State of a view in a given page when the view stack is minimized.
      Since:
      3.2
      See Also:
    • STATE_MAXIMIZED

      static final int STATE_MAXIMIZED
      State of a view in a given page when the page is zoomed in on the view stack.
      Since:
      3.2
      See Also:
    • STATE_RESTORED

      static final int STATE_RESTORED
      State of a view in a given page when the view stack is in it's normal state.
      Since:
      3.2
      See Also:
  • Method Details

    • activate

      void activate(IWorkbenchPart part)
      Activates the given part. The part will be brought to the front and given focus. The part must belong to this page.
      Parameters:
      part - the part to activate
    • addPropertyChangeListener

      @Deprecated void addPropertyChangeListener(IPropertyChangeListener listener)
      Deprecated.
      client should register listeners on the instance of IWorkingSetManager returned by IWorkbench.getWorkingSetManager() instead.
      Adds a property change listener.
      Parameters:
      listener - the property change listener to add
      Since:
      2.0
    • bringToTop

      void bringToTop(IWorkbenchPart part)
      Moves the given part forward in the Z order of this page so as to make it visible, without changing which part has focus. The part must belong to this page.
      Parameters:
      part - the part to bring forward
    • close

      boolean close()
      Closes this workbench page. If this page is the active one, this honor is passed along to one of the window's other pages if possible.

      If the page has an open editor with unsaved content, the user will be given the opportunity to save it.

      Returns:
      true if the page was successfully closed, and false if it is still open
    • closeAllEditors

      boolean closeAllEditors(boolean save)
      Closes all of the editors belonging to this workbench page.

      If the page has open editors with unsaved content and save is true, the user will be given the opportunity to save them.

      Parameters:
      save - true to save the editor contents if required (recommended), and false to discard any unsaved changes
      Returns:
      true if all editors were successfully closed, and false if at least one is still open
    • closeEditors

      boolean closeEditors(IEditorReference[] editorRefs, boolean save)
      Closes the given Array of editor references. The editors must belong to this workbench page.

      If any of the editors have unsaved content and save is true, the user will be given the opportunity to save them.

      Parameters:
      editorRefs - the editors to close
      save - true to save the editor contents if required (recommended), and false to discard any unsaved changes
      Returns:
      true if the editors were successfully closed, and false if the editors are still open
      Since:
      3.0
    • closeEditor

      boolean closeEditor(IEditorPart editor, boolean save)
      Closes the given editor. The editor must belong to this workbench page.

      If the editor has unsaved content and save is true, the user will be given the opportunity to save it.

      Parameters:
      editor - the editor to close
      save - true to save the editor contents if required (recommended), and false to discard any unsaved changes
      Returns:
      true if the editor was successfully closed, and false if the editor is still open
    • findView

      IViewPart findView(String viewId)
      Returns the view in this page with the specified id. There is at most one view in the page with the specified id.
      Parameters:
      viewId - the id of the view extension to use
      Returns:
      the view, or null if none is found
    • findViewReference

      IViewReference findViewReference(String viewId)
      Returns the view reference with the specified id.
      Parameters:
      viewId - the id of the view extension to use
      Returns:
      the view reference, or null if none is found
      Since:
      3.0
    • findViewReference

      IViewReference findViewReference(String viewId, String secondaryId)
      Returns the view reference with the specified id and secondary id.
      Parameters:
      viewId - the id of the view extension to use
      secondaryId - the secondary id to use, or null for no secondary id
      Returns:
      the view reference, or null if none is found
      Since:
      3.0
    • getActiveEditor

      IEditorPart getActiveEditor()
      Returns the active editor open in this page.

      This is the visible editor on the page, or, if there is more than one visible editor, this is the one most recently brought to top.

      Returns:
      the active editor, or null if no editor is active
    • findEditor

      IEditorPart findEditor(IEditorInput input)
      Returns the editor with the specified input. Returns null if there is no opened editor with that input.
      Parameters:
      input - the editor input
      Returns:
      an editor with input equals to input
    • findEditors

      IEditorReference[] findEditors(IEditorInput input, String editorId, int matchFlags)
      Returns an array of editor references that match the given input and/or editor id, as specified by the given match flags. Returns an empty array if there are no matching editors, or if matchFlags is MATCH_NONE.
      Parameters:
      input - the editor input, or null if MATCH_INPUT is not specified in matchFlags
      editorId - the editor id, or null if MATCH_ID is not specified in matchFlags
      matchFlags - a bit mask consisting of zero or more of the MATCH_* constants OR-ed together
      Returns:
      the references for the matching editors
      Since:
      3.2
      See Also:
    • getEditors

      @Deprecated IEditorPart[] getEditors()
      Deprecated.
      Clients are encouraged to use getEditorReferences() instead. Calling this method has the side effect of restoring all the editors in the page which can cause plug-in activation.
      Returns a list of the editors open in this page.

      Note that each page has its own editors; editors are never shared between pages.

      Returns:
      a list of open editors
    • getEditorReferences

      IEditorReference[] getEditorReferences()
      Returns an array of references to open editors in this page.

      Note that each page has its own editors; editors are never shared between pages.

      Returns:
      a list of open editors
    • getDirtyEditors

      IEditorPart[] getDirtyEditors()
      Returns a list of dirty editors in this page.
      Returns:
      a list of dirty editors
    • getInput

      IAdaptable getInput()
      Returns the input for this page.
      Returns:
      the input for this page, or null if none
    • getLabel

      String getLabel()
      Returns the page label. This will be a unique identifier within the containing workbench window.
      Returns:
      the page label
    • getPerspective

      IPerspectiveDescriptor getPerspective()
      Returns the current perspective descriptor for this page, or null if there is no current perspective.
      Returns:
      the current perspective descriptor or null
      See Also:
    • getViewReferences

      IViewReference[] getViewReferences()
      Returns a list of the reference to views visible on this page.

      Note that each page has its own views; views are never shared between pages.

      Returns:
      a list of references to visible views
    • getViews

      @Deprecated IViewPart[] getViews()
      Deprecated.
      Clients are encouraged to use getViewReferences() instead. Calling this method has the side effect of restoring all the views in the page which can cause plug-in activation.
      Returns a list of the views visible on this page.

      Note that each page has its own views; views are never shared between pages.

      Returns:
      a list of visible views
    • getWorkbenchWindow

      IWorkbenchWindow getWorkbenchWindow()
      Returns the workbench window of this page.
      Returns:
      the workbench window
    • getWorkingSet

      @Deprecated IWorkingSet getWorkingSet()
      Deprecated.
      individual views should store a working set if needed
      Returns the working set of this page.
      Returns:
      the working set of this page.
      Since:
      2.0
    • hideActionSet

      void hideActionSet(String actionSetID)
      Hides an action set in this page.

      In most cases where this method is used the caller is tightly coupled to a particular action set. They define it in the registry and may make it visible in certain scenarios by calling showActionSet. A static variable is often used to identify the action set id in caller code.

      Parameters:
      actionSetID - the action set to hide
    • hideView

      void hideView(IViewPart view)
      Hides the given view. The view must belong to this page.
      Parameters:
      view - the view to hide
    • hideView

      void hideView(IViewReference view)
      Hides the given view that belongs to the reference, if any.
      Parameters:
      view - the references whos view is to be hidden
      Since:
      3.0
    • isPartVisible

      boolean isPartVisible(IWorkbenchPart part)
      Returns whether the specified part is visible.
      Parameters:
      part - the part to test
      Returns:
      boolean true if part is visible
    • isEditorAreaVisible

      boolean isEditorAreaVisible()
      Returns whether the page's current perspective is showing the editor area.
      Returns:
      true when editor area visible, false otherwise
    • reuseEditor

      void reuseEditor(IReusableEditor editor, IEditorInput input)
      Reuses the specified editor by setting its new input.
      Parameters:
      editor - the editor to be reused
      input - the new input for the reusable editor
    • openEditor

      IEditorPart openEditor(IEditorInput input, String editorId) throws PartInitException
      Opens an editor on the given input.

      If this page already has an editor open on the target input that editor is activated; otherwise, a new editor is opened. Two editor inputs, input1 and input2, are considered the same if

       input1.equals(input2) == true
       

      The editor type is determined by mapping editorId to an editor extension registered with the workbench. An editor id is passed rather than an editor object to prevent the accidental creation of more than one editor for the same input. It also guarantees a consistent lifecycle for editors, regardless of whether they are created by the user or restored from saved data.

      Parameters:
      input - the editor input
      editorId - the id of the editor extension to use
      Returns:
      an open and active editor, or null if an external editor was opened
      Throws:
      PartInitException - if the editor could not be created or initialized
    • openEditor

      IEditorPart openEditor(IEditorInput input, String editorId, boolean activate) throws PartInitException
      Opens an editor on the given input.

      If this page already has an editor open on the target input that editor is brought to the front; otherwise, a new editor is opened. Two editor inputs are considered the same if they equal. See Object.equals(Object) and IEditorInput. If activate == true the editor will be activated.

      The editor type is determined by mapping editorId to an editor extension registered with the workbench. An editor id is passed rather than an editor object to prevent the accidental creation of more than one editor for the same input. It also guarantees a consistent lifecycle for editors, regardless of whether they are created by the user or restored from saved data.

      Parameters:
      input - the editor input
      editorId - the id of the editor extension to use
      activate - if true the editor will be activated
      Returns:
      an open editor, or null if an external editor was opened
      Throws:
      PartInitException - if the editor could not be created or initialized
    • openEditor

      IEditorPart openEditor(IEditorInput input, String editorId, boolean activate, int matchFlags) throws PartInitException
      Opens an editor on the given input.

      If this page already has an editor open that matches the given input and/or editor id (as specified by the matchFlags argument), that editor is brought to the front; otherwise, a new editor is opened. Two editor inputs are considered the same if they equal. See Object.equals(Object) and IEditorInput. If activate == true the editor will be activated.

      The editor type is determined by mapping editorId to an editor extension registered with the workbench. An editor id is passed rather than an editor object to prevent the accidental creation of more than one editor for the same input. It also guarantees a consistent lifecycle for editors, regardless of whether they are created by the user or restored from saved data.

      Parameters:
      input - the editor input
      editorId - the id of the editor extension to use
      activate - if true the editor will be activated
      matchFlags - a bit mask consisting of zero or more of the MATCH_* constants OR-ed together
      Returns:
      an open editor, or null if an external editor was opened
      Throws:
      PartInitException - if the editor could not be created or initialized
      Since:
      3.2
      See Also:
    • removePropertyChangeListener

      void removePropertyChangeListener(IPropertyChangeListener listener)
      Removes the property change listener.
      Parameters:
      listener - the property change listener to remove
      Since:
      2.0
    • resetPerspective

      void resetPerspective()
      Changes the visible views, their layout, and the visible action sets within the page to match the current perspective descriptor. This is a rearrangement of components and not a replacement. The contents of the current perspective descriptor are unaffected.

      For more information on perspective change see setPerspective().

    • saveAllEditors

      boolean saveAllEditors(boolean confirm)
      Saves the contents of all dirty editors belonging to this workbench page. If there are no dirty editors this method returns without effect.

      If confirm is true the user is prompted to confirm the command.

      Note that as of 3.2, this method also saves views that implement ISaveablePart and are dirty.

      Parameters:
      confirm - true to ask the user before saving unsaved changes (recommended), and false to save unsaved changes without asking
      Returns:
      true if the command succeeded, and false if the operation was canceled by the user or an error occurred while saving
    • saveEditor

      boolean saveEditor(IEditorPart editor, boolean confirm)
      Saves the contents of the given editor if dirty. If not, this method returns without effect.

      If confirm is true the user is prompted to confirm the command. Otherwise, the save happens without prompt.

      The editor must belong to this workbench page.

      Parameters:
      editor - the editor to close
      confirm - true to ask the user before saving unsaved changes (recommended), and false to save unsaved changes without asking
      Returns:
      true if the command succeeded, and false if the editor was not saved
    • savePerspective

      void savePerspective()
      Saves the visible views, their layout, and the visible action sets for this page to the current perspective descriptor. The contents of the current perspective descriptor are overwritten.
    • savePerspectiveAs

      void savePerspectiveAs(IPerspectiveDescriptor perspective)
      Saves the visible views, their layout, and the visible action sets for this page to the given perspective descriptor. The contents of the given perspective descriptor are overwritten and it is made the current one for this page.
      Parameters:
      perspective - the perspective descriptor to save to
    • setEditorAreaVisible

      void setEditorAreaVisible(boolean showEditorArea)
      Show or hide the editor area for the page's active perspective.
      Parameters:
      showEditorArea - true to show the editor area, false to hide the editor area
    • setPerspective

      void setPerspective(IPerspectiveDescriptor perspective)
      Changes the visible views, their layout, and the visible action sets within the page to match the given perspective descriptor. This is a rearrangement of components and not a replacement. The contents of the old perspective descriptor are unaffected.

      When a perspective change occurs the old perspective is deactivated (hidden) and cached for future reference. Then the new perspective is activated (shown). The views within the page are shared by all existing perspectives to make it easy for the user to switch between one perspective and another quickly without loss of context.

      During activation the action sets are modified. If an action set is specified in the new perspective which is not visible in the old one it will be created. If an old action set is not specified in the new perspective it will be disposed.

      The visible views and their layout within the page also change. If a view is specified in the new perspective which is not visible in the old one a new instance of the view will be created. If an old view is not specified in the new perspective it will be hidden. This view may reappear if the user selects it from the View menu or if they switch to a perspective (which may be the old one) where the view is visible.

      The open editors are not modified by this method.

      Parameters:
      perspective - the perspective descriptor
    • showActionSet

      void showActionSet(String actionSetID)
      Shows an action set in this page.

      In most cases where this method is used the caller is tightly coupled to a particular action set. They define it in the registry and may make it visible in certain scenarios by calling showActionSet. A static variable is often used to identify the action set id in caller code.

      Parameters:
      actionSetID - the action set to show
    • showView

      IViewPart showView(String viewId) throws PartInitException
      Shows the view identified by the given view id in this page and gives it focus. If there is a view identified by the given view id (and with no secondary id) already open in this page, it is given focus.
      Parameters:
      viewId - the id of the view extension to use
      Returns:
      the shown view
      Throws:
      PartInitException - if the view could not be initialized
    • showView

      IViewPart showView(String viewId, String secondaryId, int mode) throws PartInitException
      Shows a view in this page with the given id and secondary id. The behaviour of this method varies based on the supplied mode. If VIEW_ACTIVATE is supplied, the view is given focus. If VIEW_VISIBLE is supplied, then it is made visible but not given focus. Finally, if VIEW_CREATE is supplied the view is created and will only be made visible if it is not created in a folder that already contains visible views.

      This allows multiple instances of a particular view to be created. They are disambiguated using the secondary id. If a secondary id is given, the view must allow multiple instances by having specified allowMultiple="true" in its extension.

      Parameters:
      viewId - the id of the view extension to use
      secondaryId - the secondary id to use, or null for no secondary id
      mode - the activation mode. Must be VIEW_ACTIVATE, VIEW_VISIBLE or VIEW_CREATE
      Returns:
      a view
      Throws:
      PartInitException - if the view could not be initialized
      IllegalArgumentException - if the supplied mode is not valid
      Since:
      3.0
    • isEditorPinned

      boolean isEditorPinned(IEditorPart editor)
      Returns true if the editor is pinned and should not be reused.
      Parameters:
      editor - the editor to test
      Returns:
      boolean whether the editor is pinned
    • getEditorReuseThreshold

      @Deprecated int getEditorReuseThreshold()
      Deprecated.
      Returns the number of open editors before reusing editors.
      Returns:
      a int
    • setEditorReuseThreshold

      @Deprecated void setEditorReuseThreshold(int openEditors)
      Deprecated.
      use IPageLayout.setEditorReuseThreshold(int openEditors) instead.
      Set the number of open editors before reusing editors. If < 0 the user preference settings will be used.
      Parameters:
      openEditors - the threshold
    • getNavigationHistory

      INavigationHistory getNavigationHistory()
      Returns the navigation history which manages a list of entries keeping the history of places (positions, selection and editors) the user visited making it easier to the user to move back and forward without losing context.
      Returns:
      the navigation history
      Since:
      2.1
    • getViewStack

      IViewPart[] getViewStack(IViewPart part)
      Returns an array of IViewParts that are stacked with the given part in the currently active perspective.
      Parameters:
      part - the part to test
      Returns:
      the parts that are stacked with this part, including the part in question. null is returned if the part does not belong to this page or the part is not contained in the active perspective. The parts are in LRU order.
      Since:
      3.0
    • getNewWizardShortcuts

      String[] getNewWizardShortcuts()
      Returns the new wizard shortcuts associated with the current perspective. Returns an empty array if there is no current perspective.
      Returns:
      an array of wizard identifiers
      Since:
      3.1
      See Also:
    • getPerspectiveShortcuts

      String[] getPerspectiveShortcuts()
      Returns the perspective shortcuts associated with the current perspective. Returns an empty array if there is no current perspective.
      Returns:
      an array of perspective identifiers
      Since:
      3.1
      See Also:
    • getShowViewShortcuts

      String[] getShowViewShortcuts()
      Returns the show view shortcuts associated with the current perspective. Returns an empty array if there is no current perspective.
      Returns:
      an array of view identifiers
      Since:
      3.1
      See Also:
    • getOpenPerspectives

      IPerspectiveDescriptor[] getOpenPerspectives()
      Returns the descriptors for the perspectives that are open in this page, in the order in which they were opened.
      Returns:
      the open perspective descriptors, in order of opening
      Since:
      3.1
    • getSortedPerspectives

      IPerspectiveDescriptor[] getSortedPerspectives()
      Returns the descriptors for the perspectives that are open in this page, in the order in which they were activated (oldest first).
      Returns:
      the open perspective descriptors, in order of activation
      Since:
      3.1
    • closePerspective

      void closePerspective(IPerspectiveDescriptor desc, boolean saveParts, boolean closePage)
      Closes the specified perspective in this page. If the last perspective in this page is closed, then all editors are closed. Views that are not shown in other perspectives are closed as well. If saveParts is true, the user will be prompted to save any unsaved changes for parts that are being closed. The page itself is closed if closePage is true.
      Parameters:
      desc - the descriptor of the perspective to be closed
      saveParts - whether the page's parts should be saved if closed
      closePage - whether the page itself should be closed if last perspective
      Since:
      3.1
    • closeAllPerspectives

      void closeAllPerspectives(boolean saveEditors, boolean closePage)
      Closes all perspectives in this page. All editors are closed, prompting to save any unsaved changes if saveEditors is true. The page itself is closed if closePage is true.
      Parameters:
      saveEditors - whether the page's editors should be saved
      closePage - whether the page itself should be closed
      Since:
      3.1
    • getExtensionTracker

      IExtensionTracker getExtensionTracker()

      Return the extension tracker for the workbench. This tracker may be used by plug-ins to ensure responsiveness to changes to the plug-in registry.

      The tracker at this level of the workbench is typically used to track elements that only exist over the lifespan of a page. For example, ViewPart objects fall into this category.

      Returns:
      the extension tracker
      Since:
      3.1
      See Also:
    • getWorkingSets

      IWorkingSet[] getWorkingSets()
      Return the visible working sets for this page. Please note that this array is not filtered by activities. Clients should attempt to ensure that any use of this method is consistant with the currently enabled activity set.
      Returns:
      the visible working sets for this page
      Since:
      3.2
      See Also:
    • setWorkingSets

      void setWorkingSets(IWorkingSet[] sets)
      Set the working sets for this page. Any duplicate entries will be removed from the array by this method.
      Parameters:
      sets - the new working sets for this page. The array may be empty, but no element in the array may be null.
      Since:
      3.2
    • getAggregateWorkingSet

      IWorkingSet getAggregateWorkingSet()
      Return a working set that contains all of the elements contained in the array of working sets provided by getWorkingSets(). Should this array or the underlying elements in any of the working sets change this set will be updated.

      This working set is never null, even if there are no working sets assigned to this page via setWorkingSets(IWorkingSet[]). It is recommended that any client that uses this API be aware of this and act accordingly. Specifically, it is recommended that any client utilizing this or any other IWorkingSet whose IWorkingSet.isAggregateWorkingSet() returns true act as if they are not using any working set if the set is empty. These clients should also maintain an awareness of the contents of aggregate working sets and toggle this behavior should the contents of the aggregate either become empty or non-empty.

      Example pseudocode showing how some workingset utilizing component could react to changes in aggregate working sets:

       
       private IWorkingSet myWorkingSet;
      
       IPropertyChangeListener workingSetListener = new IPropertyChangeListener() {
              void propertyChange(PropertyChangeEvent event) {
                      if (isMyCurrentWorkingSet(event)) {
                              if (isEmptyAggregate(myWorkingSet)) {
                                      showNoSet();
                              }
                              else {
                                      showSet();
                              }
                      }
              }
       };
      
       void setWorkingSet(IWorkingSet newSet) {
                      myWorkingSet = newSet;
                      if (myWorkingSet == null || isEmptyAggregate(myWorkingSet)){
                              showNoSet();
                      }
                      else {
                              showSet();
                      }
       }
       
       
      Returns:
      the aggregate working set for this page, this implements IAggregateWorkingSet
      Since:
      3.2
      See Also:
    • isPageZoomed

      boolean isPageZoomed()
      Returns the page "zoomed" state.
      Returns:
      true if the page is zoomed in the workbench window, false otherwise.
      Since:
      3.2
    • zoomOut

      void zoomOut()
      Zooms out the zoomed-in part. If the page does not have a zoomed part, it does nothing.
      Since:
      3.2
    • toggleZoom

      void toggleZoom(IWorkbenchPartReference ref)
      Zoom the page in on a part. If the part is already in zoom then zoom out.
      Parameters:
      ref - the workbench part to zoom in on. Must not be null.
      Since:
      3.2
    • getPartState

      int getPartState(IWorkbenchPartReference ref)
      Returns the maximized/minimized/restored state of the given part reference.
      Parameters:
      ref - the workbench part to query. Must not be null.
      Returns:
      one of the STATE_* contants.
      Since:
      3.2
    • setPartState

      void setPartState(IWorkbenchPartReference ref, int state)
      Set the state of the given part reference. Setting the state of one part can effect the state of other parts.
      Parameters:
      ref - the workbench part reference. Must not be null.
      state - one of the STATE_* constants.
      Since:
      3.2
    • getReference

      Find the part reference for the given part. A convenience method to quickly go from part to part reference.
      Parameters:
      part - The part to search for. It can be null.
      Returns:
      The reference for the given part, or null if no reference can be found.
      Since:
      3.2
    • showEditor

      void showEditor(IEditorReference ref)
      Add back an open but non-participating editor
      Parameters:
      ref - the editor to re-add. Must be an editor removed using #hideEditor(IEditorReference), must not have been closed, and must not be null.
      Since:
      3.5
      See Also:
    • hideEditor

      void hideEditor(IEditorReference ref)
      Remove an open editor, turn it into a non-participating editor.

      A non-participating editor will not be returned in the list of open editors (getEditorReferences()) and will not be visible in the editor area. However, it will continue to participate in the save lifecycle and may still be closed by some workbench close events.

      Behaviour for hiding and showing editors from multiple stacks is not defined (and unsupported) at this time.

      Parameters:
      ref - the editor reference to remove. It must be a current open editor belonging to this page, and must not be null.
      Since:
      3.5
      See Also:
    • openEditors

      IEditorReference[] openEditors(IEditorInput[] inputs, String[] editorIDs, int matchFlags) throws MultiPartInitException
      Opens editors for the given inputs. Only the editor constructed for the first input gets activated.

      The editor type is determined by mapping editorIDs to an editor extension registered with the workbench. An editor id is passed rather than an editor object to prevent the accidental creation of more than one editor for the same input. It also guarantees a consistent lifecycle for editors, regardless of whether they are created by the user or restored from saved data.

      The length of the input array and editor ID arrays must be the same. The editors are opened using pairs of { input[i], editorIDs[i] }.

      Parameters:
      inputs - the editor inputs
      editorIDs - the IDs of the editor extensions to use, in the order of inputs
      matchFlags - a bit mask consisting of zero or more of the MATCH_* constants OR-ed together
      Returns:
      references to the editors constructed for the inputs. The editors corresponding to those reference might not be materialized.
      Throws:
      MultiPartInitException - if at least one editor could not be created or initialized
      Since:
      3.5
      See Also:
    • openEditors

      IEditorReference[] openEditors(IEditorInput[] inputs, String[] editorIDs, IMemento[] mementos, int matchFlags, int activateIndex) throws MultiPartInitException
      Opens editors for the given inputs. Only the editor constructed for the given index will be activated.

      There are effectively two different ways to use this method based on what information the supplied mementos contain @see org.eclipse.ui.IWorkbenchPage #getEditorState(org.eclipse.ui.IEditorReference []):

      1. If the mementos contain the 'input' information then only the memento itself is required since it can be used to re-create the editor input and its editorID. If all the mementos are of this type then the inputs and editorIDs arrays may be null.
      2. If the supplied memento only contains the editor state then both the input and editorID must be non-null.

      The editor type is determined by mapping editorIDs to an editor extension registered with the workbench. An editor id is passed rather than an editor object to prevent the accidental creation of more than one editor for the same input. It also guarantees a consistent lifecycle for editors, regardless of whether they are created by the user or restored from saved data.

      The length of the input array and editor ID arrays must be the same. The editors are opened using pairs of { input[i], editorIDs[i] }.

      The mementos array mat be null but if not must match the input array in length. Entries in the mementos array may also be null if no state is desired for that particular editor.

      Parameters:
      inputs - the editor inputs
      editorIDs - the IDs of the editor extensions to use, in the order of inputs
      mementos - the mementos representing the state to open the editor with. If the supplied memento contains the input's state as well as the editor's state then the corresponding entries in the 'inputs' and 'ids' arrays may be null (they will be created from the supplied memento).
      matchFlags - a bit mask consisting of zero or more of the MATCH_* constants OR-ed together
      activateIndex - the index of the editor to make active or -1 if no activation is desired.
      Returns:
      references to the editors constructed for the inputs. The editors corresponding to those reference might not be materialized.
      Throws:
      MultiPartInitException - if at least one editor could not be created or initialized
      Since:
      3.8.2
      See Also:
    • getEditorState

      IMemento[] getEditorState(IEditorReference[] editorRefs, boolean includeInputState)
      Return an IMemento containing the current state of the editor for each of the given references. These mementos may be used to determine the initial state of an editor on a subsequent open.
      Parameters:
      editorRefs - The array of editor references to get the state for
      includeInputState - If true then the resulting memento will be contain the editor input's state as well as the editor's state.
      Returns:
      The array of mementos. The length of the array will match that of the refs array.
      Since:
      3.8.2