Class FillTransition



  • public final class FillTransition
    extends Transition
    This Transition creates an animation, that changes the filling of a shape over a duration. This is done by updating the fill variable of the shape at regular intervals.

    It starts from the fromValue if provided else uses the shape 's fill value. (The stroke value has to be a Color in this case).

    It stops at the toValue value.

    Code Segment Example:

     
     import javafx.scene.shape.*;
     import javafx.animation.*;
    
     ...
    
         Rectangle rect = new Rectangle (100, 40, 100, 100);
         rect.setArcHeight(50);
         rect.setArcWidth(50);
    
         FillTransition ft = new FillTransition(Duration.millis(3000), rect, Color.RED, Color.BLUE);
         ft.setCycleCount(4);
         ft.setAutoReverse(true);
    
         ft.play();
    
     ...
    
     
     
    Since:
    JavaFX 2.0
    See Also:
    Transition, Animation
    • Property Detail

      • shape

        public final ObjectProperty<Shape> shapeProperty
        The target shape of this FillTransition.

        It is not possible to change the target shape of a running FillTransition. If the value of shape is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        See Also:
        getShape(), setShape(Shape)
      • duration

        public final ObjectProperty<Duration> durationProperty
        The duration of this FillTransition.

        It is not possible to change the duration of a running FillTransition. If the value of duration is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

        Default value:
        400ms
        See Also:
        getDuration(), setDuration(Duration)
      • fromValue

        public final ObjectProperty<Color> fromValueProperty
        Specifies the start color value for this FillTransition.

        It is not possible to change fromValue of a running FillTransition. If the value of fromValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
        See Also:
        getFromValue(), setFromValue(Color)
      • toValue

        public final ObjectProperty<Color> toValueProperty
        Specifies the stop color value for this FillTransition.

        It is not possible to change toValue of a running FillTransition. If the value of toValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
        See Also:
        getToValue(), setToValue(Color)
    • Constructor Detail

      • FillTransition

        public FillTransition​(Duration duration,
                              Shape shape,
                              Color fromValue,
                              Color toValue)
        The constructor of FillTransition
        Parameters:
        duration - The duration of the FillTransition
        shape - The shape which filling will be animated
        fromValue - The start value of the color-animation
        toValue - The end value of the color-animation
      • FillTransition

        public FillTransition​(Duration duration,
                              Color fromValue,
                              Color toValue)
        The constructor of FillTransition
        Parameters:
        duration - The duration of the FillTransition
        fromValue - The start value of the color-animation
        toValue - The end value of the color-animation
      • FillTransition

        public FillTransition​(Duration duration,
                              Shape shape)
        The constructor of FillTransition
        Parameters:
        duration - The duration of the FillTransition
        shape - The shape which filling will be animated
      • FillTransition

        public FillTransition​(Duration duration)
        The constructor of FillTransition
        Parameters:
        duration - The duration of the FadeTransition
      • FillTransition

        public FillTransition​()
        The constructor of FillTransition
    • Method Detail

      • setShape

        public final void setShape​(Shape value)
        Sets the value of the property shape.
        Property description:
        The target shape of this FillTransition.

        It is not possible to change the target shape of a running FillTransition. If the value of shape is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

      • getShape

        public final Shape getShape​()
        Gets the value of the property shape.
        Property description:
        The target shape of this FillTransition.

        It is not possible to change the target shape of a running FillTransition. If the value of shape is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

      • shapeProperty

        public final ObjectProperty<Shape> shapeProperty​()
        The target shape of this FillTransition.

        It is not possible to change the target shape of a running FillTransition. If the value of shape is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        See Also:
        getShape(), setShape(Shape)
      • setDuration

        public final void setDuration​(Duration value)
        Sets the value of the property duration.
        Property description:
        The duration of this FillTransition.

        It is not possible to change the duration of a running FillTransition. If the value of duration is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

        Default value:
        400ms
      • getDuration

        public final Duration getDuration​()
        Gets the value of the property duration.
        Property description:
        The duration of this FillTransition.

        It is not possible to change the duration of a running FillTransition. If the value of duration is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

        Default value:
        400ms
      • durationProperty

        public final ObjectProperty<Duration> durationProperty​()
        The duration of this FillTransition.

        It is not possible to change the duration of a running FillTransition. If the value of duration is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

        Default value:
        400ms
        See Also:
        getDuration(), setDuration(Duration)
      • setFromValue

        public final void setFromValue​(Color value)
        Sets the value of the property fromValue.
        Property description:
        Specifies the start color value for this FillTransition.

        It is not possible to change fromValue of a running FillTransition. If the value of fromValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
      • getFromValue

        public final Color getFromValue​()
        Gets the value of the property fromValue.
        Property description:
        Specifies the start color value for this FillTransition.

        It is not possible to change fromValue of a running FillTransition. If the value of fromValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
      • fromValueProperty

        public final ObjectProperty<Color> fromValueProperty​()
        Specifies the start color value for this FillTransition.

        It is not possible to change fromValue of a running FillTransition. If the value of fromValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
        See Also:
        getFromValue(), setFromValue(Color)
      • setToValue

        public final void setToValue​(Color value)
        Sets the value of the property toValue.
        Property description:
        Specifies the stop color value for this FillTransition.

        It is not possible to change toValue of a running FillTransition. If the value of toValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
      • getToValue

        public final Color getToValue​()
        Gets the value of the property toValue.
        Property description:
        Specifies the stop color value for this FillTransition.

        It is not possible to change toValue of a running FillTransition. If the value of toValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
      • toValueProperty

        public final ObjectProperty<Color> toValueProperty​()
        Specifies the stop color value for this FillTransition.

        It is not possible to change toValue of a running FillTransition. If the value of toValue is changed for a running FillTransition, the animation has to be stopped and started again to pick up the new value.

        Default value:
        null
        See Also:
        getToValue(), setToValue(Color)
      • interpolate

        protected void interpolate​(double frac)
        The method interpolate() has to be provided by implementations of Transition. While a Transition is running, this method is called in every frame. The parameter defines the current position with the animation. At the start, the fraction will be 0.0 and at the end it will be 1.0. How the parameter increases, depends on the interpolator, e.g. if the interpolator is Interpolator.LINEAR, the fraction will increase linear. This method must not be called by the user directly.
        Specified by:
        interpolate in class Transition
        Parameters:
        frac - The relative position